Kuwii
Activator 15ml - For Dip Powder
Activator 15ml - For Dip Powder
Couldn't load pickup availability
The Dip Powder Activator is the critical setting agent in any dip system. It acts as a catalyst, curing the Base Resin (cyanoacrylate) to a rock-hard, durable state. This chemical reaction sets the powder layers, preparing them for filing, shaping, and the final Top Coat.
How to Use (Application Instructions):
For a solid, fully cured enhancement, follow these steps precisely:
After Dip Application: Ensure all necessary dip powder and Base Resin layers have been applied and excess powder has been thoroughly brushed off. The surface should be rough and matte.
Apply Activator: Apply a generous, even layer of the Activator over the entire nail surface, covering all powder and resin layers. Be thorough, as any area not saturated by the Activator will remain soft.
Initial Cure: Allow the Activator to air-dry completely for approximately 1–2 minutes. The product will harden the layers, making them ready for shaping.
File and Shape: Once fully hardened, file and buff the entire nail surface to the desired shape and smoothness. Remove all dust with a clean, dry brush or lint-free wipe.
Final Activation: Apply a second, thin coat of Activator. This final layer ensures maximum hardness and prepares the surface for the Top Coat application, which must be applied while this layer is still damp.
Key Benefits:
Rapid Chemical Cure: Instantly initiates the polymerization process, quickly hardening the Base Resin and powder into a strong, non-flexible enhancement.
Maximum Durability: Ensures the service reaches its full strength potential, providing a wear-resistant overlay that resists chipping, cracking, and daily wear.
Saves Time: Eliminates the need for a curing lamp, streamlining the dipping process and speeding up service time.
Shape Preparation: Cures the surface to the necessary hardness required for professional filing and shaping without compromising the underlying structure.
Warnings and Safety Precautions:
Please adhere to professional safety standards to prevent damage or injury:
Avoid Skin Contact: Do not allow the product to touch the skin or cuticles. Excessive contact may lead to skin irritation or potential sensitization. Wipe away any contact immediately.
Ventilation: Use this product in a well-ventilated area to disperse strong odors and vapors.
Keep Away From Heat: The Activator is highly flammable. Keep the product tightly capped and stored away from heat, open flames, or any ignition sources.
Tightly Capped: Always cap the bottle immediately after use, as exposure to air can cause the product to thicken or contaminate the brush.
Discontinue Use: If irritation, redness, or burning occurs, remove the product immediately and seek medical advice.
How to use and Warnings
How to use and Warnings
💅 How to Use (Step-by-Step Instructions):
For best results, follow the Gel Polish sequence precisely:
Step 1: Prep & Prime
Use the Cuticle Pusher to gently push back the cuticles. Shape the natural nail with the Nail File and lightly buff the surface to remove shine. Cleanse the nail (alcohol wipe recommended). Apply a thin coat of Primer and let it air-dry completely.
Step 2: Base Coat
Apply a very thin, even coat of the Base Coat (like the Bottom Coat). This layer adheres the polish to the natural nail. Cure this coat under a UV/LED lamp for 60 seconds. Do not wipe the tacky layer.
Step 3: Color Application
Apply a thin, even coat of your chosen Gel Polish Color. Avoid getting polish on the skin or cuticles. Cure this coat under a UV/LED lamp for 60 seconds. Apply a second thin coat of Color for opacity, and cure again for 60 seconds.
Step 4: Top Coat & Finish
Apply a thin, even coat of the Top Coat (like the Top Coat). Ensure the free edge (tip) of the nail is sealed. Cure this final coat under a UV/LED lamp for 60-120 seconds (follow your lamp's instructions). If your Top Coat leaves a sticky residue (a "tacky layer"), wipe it gently with an alcohol pad to reveal the high-gloss shine.
✨ Key Benefits:
- Salon-Quality Shine: Achieves a highly pigmented, glass-like finish that is chip-resistant and lasts up to three weeks.
- LED/UV Cured Durability: The light-curing process ensures a quick, hard, and durable set that provides long-lasting wear.
- Full System Inclusion: Includes the essential Base Coat, Top Coat, and Color Gels, along with necessary tools like the Cuticle Pusher and Nail File for immediate application.
- Ready-to-Go Kit: Perfect for beginners and enthusiasts, offering a complete professional system in one convenient box.
⚠️ Warnings and Safety Precautions:
Please adhere to safety guidelines for proper product use:
- Avoid Skin Contact: Gel polish may cause irritation if it cures on the skin. Avoid all contact with the skin. If contact occurs, wipe it away immediately before curing.
- Proper Curing: Ensure your UV/LED lamp is working correctly and that you cure each layer for the recommended time to prevent under-curing, which can lead to irritation.
- Storage: Keep all gel polish bottles tightly capped and stored away from direct light (especially sunlight or the UV/LED lamp), as the product will prematurely cure and harden.
- Discontinue Use: If irritation, redness, or burning occurs, remove the product immediately and seek medical advice.
- Removal: Do not peel or forcefully remove gel polish. Use the proper soak-off method (usually with acetone) to prevent damage to your natural nails.
Share
